Item # bci595378

Emtek Denver Double Cylinder Grip-by-Grip Keyed Entry Sandcast Bronze Handleset

Model: 454212MB

$744.80
Finish: Choose Finish
  • Flat Black
    Flat Black
    $705.60
    Special Order
  • Medium Bronze
    Medium Bronze
    $744.80
    Special Order
  • Tumbled White Bronze
    Tumbled White Bronze
    $744.80
    Special Order

Free Shipping!

Special Order
Configure Your Emtek 454212 Denver Double Cylinder Grip-by-Grip Keyed Entry Sandcast Bronze Handleset
  • Backset

    The backset of your door is the measurement from the edge of the door to the center of the bore hole. Some products have an adjustable backset latch; however this product does require a designation.
    Please Select One
  • Door Thickness

    Measure this dimension to determine what your needs are for your door hardware. Please refer to the installation instructions and technical specifications of each product to make sure your doors and the door hardware you choose are compatible.
    Please Select One
  • Free Keying Option

    Free Keying Option

    Select "Keyed Alike" to use the same key on multiple locks, "Keyed Different" for unique keys, or enter a key code (Typically a 5 digit number) to match this lock to pre-owned locks. Locksmiths can identify key codes on pre-owned locks.

    Please Select One
  • Handing

    Certain products are Handed and require a Right or Left designation. When facing your door from the exterior side, whichever side that the hinges are on determines the handing.
    Please Select One
  • Latch Type

    Most residential doors are mortised for either a round corner or square corner latch. Drive-in latches do not have a faceplate and are generally used on hollow doors.
    Please Select One
$744.80

Product Overview

All Emtek items are made to order.

Emtek's double cylinder handlesets use traditional American locks complete with a variety of trim styles, handcrafted from authentic materials. The handleset is operated by a key from both the exterior and the interior. The door is opened from both sides by a metal handle with thumb grip. Uncompromisingly rugged and beautifully crafted, these locks are suitable for the very finest homes.

Emtek's Sandcast Bronze Collection is cast from molten bronze one piece at a time into authentic rustic designs. The Sandcast Collection's patina finishes are achieved using the traditional techniques of bronze sculptors. With pitted surfaces and hand-finished patinas, these uniquely American designs resonate a calm strength. The Sandcast Bronze Collection's knob / lever handles are supported by springs mounted behind the rosettes and sideplates, which return the handles back to the rest position and prevent lever sag. The latches are heavy-duty die cast construction, with strong internal springs, solid brass nose bolts, and sintered metal cams. A plastic bushing located in the joint between the handle and the rosette ensures a friction-free wear surface, preventing metal from bearing on metal and providing smooth, long-lasting operation. Handles are positively connected to rosettes with a permanent clip. Each has a set screw which eliminates "handle wobble" when tightened. Emtek's threaded tubes are machined brass to ensure good threads and prevent corrosion.

Features:

  • Standard Door Prep
  • Schlage C Keyway
  • Solid Cast Bronze Trim
  • Two keys will be shipped per lock. Three or more items keyed alike will ship a total of 6 keys

Specifications:

  • Height: 16-1/4"
  • Width: 2-13/16"
  • Projection: 3"
  • Material: Cast Bronze
  • Door Thickness: 1-5/8" - 3"
  • Backset: 2-3/8" or 2-3/4"

Emtek is dedicated to bringing interesting, well made hardware back into American homes. Emtek's mission is to satisfy the higher expectations of today's homeowners with regard to door locks. They strive to provide a broad and interesting range of products that consumers can use as elements of decor, and not just as a way to latch a door.


This product is listed under the following manufacturer number(s):


*Denotes a finish or option that has been discontinued.

Dimensions and Measurements

Backset
2-3/4", 2-3/8"
Cross Bore
2-1/8"
Door Thickness
1-3/4", 1-5/8", 1-7/8", 2", 2-1/2", 2-1/4", 2-1/8", 2-3/4", 2-3/8", 2-5/8", 2-7/8", 3"
Edge Bore
1"
Grip Center to Center
6.875 in.

Included Components

Interior Included
Yes

Characteristics and Features

Cylinder Type
Double Cylinder
Function
Keyed Entry, Double Cylinder
Handing
Left, Right
Handle Material
Metal
Keyway
C
Latch Faceplate
Round Corner, Square Corner
Lock Style
Single Point
Mount
Sectional
Style
Traditional/Classic
Theme
Traditional

Warranty and Product Information

Approved for Commercial Use
No
Collection
Sandcast Bronze
Series
Denver