Emtek Teton Sandcast Bronze Passage Lever Set from the Rustic Collection

All Emtek items are made to order.

Passage Function: Emtek's passage lever sets use traditional American latches complete with a variety of trim styles, handcrafted from authentic materials. The lever set is operated by a lever from both the interior and exterior. With the passage function, the door does not lock from either side.

Features:

• Constructed from molten bronze one piece at a time into authentic rustic designs
• Choose either left or right handing
• Easily install into any standard prepared door
• The latches are heavy-duty die cast construction, with strong internal springs, solid brass nose bolts, and sintered metal cams
• Emtek offers a Limited Lifetime Warranty to the original purchaser

Specifications:

• Backset: 2-3/8" or 2-3/4"
• Cross Bore: 2-1/8"
• Edge Bore: 1"
• Door Thickness: 1-3/8" to 3"
• Handing: Left or Right
• Lever Length: 4-7/8"
• Projection: 2-3/8"
• Latch Faceplate: Round Corner, Square Corner or Drive-In
• Material: Bronze

Emtek's patina finishes are achieved using the traditional techniques of bronze sculptors. With pitted surfaces and hand-finished patinas, these uniquely American designs resonate a calm strength. The knob/lever handles are supported by springs mounted behind the rosettes and side plates, which return the handles back to the rest position and prevent lever sag. A plastic bushing located in the joint between the handle and the rosette ensures a friction-free wear surface, preventing metal from bearing on metal and providing smooth, long-lasting operation. Handles are positively connected to rosettes with a permanent clip. Each has a set screw which eliminates "handle wobble" when tightened. Emtek's threaded tubes are machined brass to ensure good threads and prevent corrosion.